Contact Us WebSearch Home My Account Help Webhosting DSL Plans Wireless Plans Main Page

Macintosh Specific Settings

Where to Put Init Strings

1. Click on the Blue telephone in the upper right corner of your screen by your clock. Then select Open FreePPP Setup.


2. Click the Modems tab at the top.


3. Select the modem configuration that you use, most likely it will be called Generic Modem. Then click the Edit button on the right.


4. At the bottom under Modem init string settings, make sure a dot is next to the Use: option. *Init strings may be entered to the right of the Use: option.


* Blue One will not be held responsible for any init strings entered without the supervision of Technical Support. If you receive errors after entering an init string, such as Port disconnected due to hardware failure, just go back into the modem control panel and remove the init string and try to connect again. Restarting your computer after removing a bad init string is recommended. If you have any questions, just call tech support at 721-2583.

Access Numbers
Dialup Settings
DSL Settings
Email Settings
Frequently Asked Questions
Check Your E-Mail

56k FAQ
Links to Computer Manufacturers
Glossary of Common Internet Terms
Mail Filtering FAQ
Modem Connection Help
Dial-Up Connection Help
Quick Reference
User Webspace FAQ and Guide

Copyright © 2024. Blue One Communications, Inc.
Home Contact Us